H-Beam Shot Blasting Machine

1H beam Shot blasting machine 2.10x7.5Kw 120kg/min blast wheel 3H beam H<=2500mm,L 6-12m 4Power 149Kw 5ISO9001-2000

HQH6925 Shot Blasting Cleaning Machine----Roller Type (H-steel dedicated)

Characteristics

1 Improve the corrosion resistance of the mechanical products and the technical materials

2 Improve the anti-fatigue performance of the H-steel and increase its service life

3 Optimize the art-statue appearance of the H-steel

4 Highly improve the cleaning efficiency

5 Reduce the cleaning labor strength

6 Reduce the environmental pollution

7 cleaning range of the H-steel: 600-2400mm

 Technical Parameters

Serial No	Item	unit	Q6925
1	effective cleaning width	mm	2500
2	dimension of inlet opening	mm	2500*800
3	length of cleaning piece	mm	3000-12000
4	Roller speed (stepless speed regulation)	mm	0.5-4.5
5	thickness of cleaning steel plate	m/min	3-60
6	abrasive flow rate	Kg/min	68250
7	Abrasive initial filling	kg	4500
8	Adjusting height of rolling brush (scraping plate)	mm	600
9	ventilation capacity	M2/h	27758
10	outsize dimension	mm	31200*8070*7500
11	pit depth	mm	2353
12	Total power(excluding dedusting)	kw	224.55
13	gross weight of machine	t	53.2

Key technology and assurance measures - we do better...

Workpiece conveyor system:

1. One of the roller sides has steel plate to arrange the roller, to be convenient to load the material.                         

2. The whole workpieces conveyor system is frequency timing, not only to synchronously running, but also can individual operate.                              

3. The roller of Shot blast cabinet has special wear-resistant jacket.

Shot blasting cleaning chamber

1. Workpieces detect devices are out of the shot blast cabinet to avoid the shot and power dust.2. With Switzerland +GF+ shot blast Wheel, shot blast quantity are large, the life of the blade more than 600 hours.    

3. Workpiece height measurement, automatically adjust the open of the shot valve.

Shot cycle purifying system

1 Elected to adopt full curtain air separator,2 The use of a dedicated core polyester hoist belt,3 Projectile controller controlling the use of gas4 Ball point of the circulatory system has the power failure alarm function

Shot dust collecting system

With large-scale cyclone + filter dust catcher. Power dust exhausting less than 80mg/m3  

Painting spray chamber

The two set  high compressed airless painting pump detecting device,running system and gun spraying device can avoid fume disturb and improve the running

Electric control system

With PLC control, computer dynamic simulating monitoring system can carry out the producing line automatically control

H-Beam Shot Blasting Machine